辅助道具城堡骰子塔说明.pdfVIP

Interior works 1: Cut and test fold the dice chute pieces (H1 H2) 2: Glue the two pieces together along the short side as shown. tab as depicted above. 3: Fold over and glue the long side tab and allow to dry. 4: Glue the remaining tab on the short side. 5: Glue the last tab of the long side and the tab at the 6: Once dry wrap the structure with some type of ad- back of the ‘elbow’ and allow to dry. hesive tape (I’ve used packing tape, but masking tape