慢走丝线切割电解锈蚀放电状态的分析和控制.docVIP

慢走丝线切割电解锈蚀放电状态的分析和控制 [摘要]电解锈蚀放电状态在慢速走丝线切割加工过程中的危害十分严重。它不仅影响工件的表面精度和机械强度，而且还影响加工速度。导致电解锈蚀放电状态的主要原因是阳极金属溶解和工作液电解现象。本文主要研究预防阳极金属溶解和工作液电解的方法，还介绍了一种慢走丝线切割控制电解锈蚀放电状态的电源装置。 关键词：慢走丝线切割　阳极溶解　电解液电离　电解锈蚀放电状态 [Abstract]Electrolysis is aserious problem to manufacturers in the Wire Electrical Discharge Machining (WEDM) proess. It affects not only the surface accurcy and mechanical strength but also the cutting speed. The main causes leading to electrolysis in WEDM are anodic dis solutionand dielectric dissociation. The present work makes a study on how to counteract them. Also, it develops an anti-electroly