三合一nc伺服整平送料机.docVIP

三合一NC伺服整平送料机 1．增加整平滚轮的数量，令材料的应力最大消除，整平后原材料的平坦度更理想，使成品率提高。 Increases the leveling hoop quantity, is eliminated most greatly the material stress, after the leveling, raw material smoothness is more ideal, causes the rate of finished products enhancement. 2．质朴坚固的构造、细致合理的设计，使全机所需作业空间缩小，操作灵活简便。 The plain firm structure, the careful reasonable design, cause entire machine to need the working space to reduce, operation nimble simple. 3．控制状态和警示在彩色的大尺寸触摸屏式操作盘上显示，配合操作安全保护系统，即便是初次使用者也能安心操作。 The control state and the caution demonstrated on the colored great size touchscreen type control panel, coordination operational safety protective system, even if is the primary user can also operate relieved. 4．健全的操作系统人性化设计，将准备工作缩短。先进的自动诊断系统，协助操作者快捷掌控本机的卓越性能。 Perfect operating system user-friendly design, Preparatory work reduction. Advanced automatic diagnosis system, Assists the operator to control this aircraft’s remarkable performance quickly. 5．采用日系伺服马达，确保高精度送料。 Japanese servo motor,Guarantee very high material feed precision. 6．送料滚轮及整平滚轮经特殊热处理，硬度高（HRC60°）、耐磨、寿命长。 Feeder rollers and level rollers have undergone special heat treatment for high precision leveling. ,hard-chrome plated and ground with min. HRC 60°、Uses in the process wear-resisting、The service life is long. 7．精心为批量冲压生产而减少浪费所设计的专业设备。 Reduces the specialized equipment which carefully for the batch ramming production the waste designs. 8．多样的机种选择，更适合冲床大小及作业的需求。若有特殊规格需求，本公司亦可承制。 Special order options available for all press sizes,ex save material with the Zig Zag Electronic Roller Feeder. 伺服整平送料机规格 SPECIFICATIONS 型号Model 项目Item YFL2-300 YFL2-400 YFL2-500 YFL2-600 YFL2-700 YFL2-800 料宽Width of Material(mm)50～300 50～400 50～500 50～600 50～700 50～800 料厚Thickness of Material(mm)0.3-3.2 最大料重Max.Coil Weight(kg)2000 3000 5000 卷料内径Coil I.D.(mm)508 卷料外径Coil O.D.(mm)1200 最大速度Max.Speed(m/min)16 标准送料精度Feed Accuracy(mm)±0.2 矫正滚轮Work Roll上Upper6/下Lower5 标准送料高度Feed level(mm)1150±100 电源电压Power Supply220VAC 60HZ 空气压Air Supply(kg/c㎡)5kg/c㎡