ABB-差压流量计FPD580 FPD581 FPD583和FPD585烟气流量计系统 选型详细技术参数样本资料.pdf

Data sheet DS/FPD580–EN Rev. B StackFlowMaster FPD581, FPD583 and FPD585 Stack gas metering systems Measurement made easy Flow metering solutions for Continuous Emissions Monitoring (CEMS) Continuous measurement Complete CEMS package available — provides continuous, in-stack measurement of — ABB can combine with analyzer system to offer a complete volume / mass flowrate and velocity CEMS package MCERTS approved Optional purging feature — meets the requirements of EN 14181 and EN 15267-3 3 — for solids contamination levels up to 300 mg/m Manual and automatic versions Suitable for wide range of stack sizes and — simple system for basic applications gas temperatures — optional meter purging and automatic zero / span — for stacks from 1 to 8 m (3.3 to 26.25 ft.) diameter and gas temperatures up to 1200 °C (2192 °F) StackFlowMaster FPD581, FPD583 and FPD585 Stack gas metering systems Introduction Each probe is designed to measure across the complete diameter of the stack. For larger diameters the probe is The FPD580 series is a range of stack gas flow metering supplied in 2 pieces that are joined on-site using a flanged solutions that, when combined with a CEMS analyzer, forms a centre coupling. This approach simplifies transportation, complete CEMS package for the measurement of mass handling and installation. flowrate of pollutants into the environment. The FPD580 is The probes are supplied in a variety of materials