电热水壶结构设计及装配仿真.doc

本科生毕业论文（设计） 题 目 电热水壶结构设计及装配仿真 学生姓名 指导教师 学 院 机 电 工 程 学 院 专业班级 完成时间 20XX年 6 月 8 日 PAGE I 摘要 本论文主要涉及的是有关电热水壶的结构设计及装配仿真。电热水壶结构主要由壶身，上壶盖，壶手柄，壶底座几个部分。电热水壶结构的设计主要包括水壶外型及内部的结构设计。电热水壶结构的设计是在结构坚固耐用的基础上，通过对其外型及易用性的创新设计，使其外观简洁，时尚，大方，用户操作方便。该电热水壶结构的设计是通过Pro/E软件对水壶的各部分零件和结构进行了实体建模。同时，还对该电热水壶各零件进行了装配。在此基础上，对该电热水壶各零件的装配过程运用3DSMax软件进行了动画仿真。最后，使用Mold flow软件对电热水壶手柄盖进行了充模流动性实验，对保压时间进行了优化计算，经过Moldflow软件分析，零件的最大体积收缩率减小，收缩率较均匀，达到了优化的效果。 关键词：电热水壶结构设计; Pro/E; 装配仿真; 3DSMax; Moldflow TOC \o 1-3 \u 全套图纸加V信 sheji1120或扣 3346389411 ABSTRACT This paper mainly deals with the electric kettle on the structural design and assembly simulation. Electric kettle pot from the main structure, on the handle, the pot handle, the base of several pot part. Electric kettle design of the main structure of the pot, including the appearance and internal structure design. Electric kettle structure was designed in a durable structure, based on its appearance and usability of innovative design; make it look simple, stylish, dependable, user convenience. The electric kettle structure was designed by Pro / E software for the pot, some of the parts and structure of solid modeling. Meanwhile, also on the electric kettle parts of the assembly. On this basis, but also on the electric kettle parts of the assembly process using 3DSMax software for the simulation. Finally, the use of Mold flow software to handle electric kettle covered by filling flow experiments, Packing right time for the optimization, after Moldflow software analysis, the largest volume parts contraction rate decreases Shrinkage more evenly to achieve optimal results. Keywords: structural design of electric kettle; Pro/E; assembly simulation ; 3DSMax; Moldflow 目录 摘要 Ⅰ ABSTRACT Ⅱ TOC \o 1-3 \u 第1章 绪论 1 1.1电热水壶行业发展现状 1 1.2电热水壶发展趋势 2 1.3研究现状 3 1.3.1电热水壶的基本结构 3 1.3.2电热水壶的基本工作原理 4 1.3.3电水壶三重安全保护功能的工作原理 4 1.3.4电热水壶的分类 4 1.4毕业设计内容 4 1.5本章小结 5 TOC \o 1