RS Components 电工电料 霍尔效应传感器 RTY360HVEAX 使用说明.pdfVIP

RTY Series Hall-Effect Rotary Position Sensors DESCRIPTION The RTY Series Hall-Effect Rotary Position Sensors provide Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270° angle monitoring in harsh transportation and industrial and 360°) are tolerant to over-travel and allow use in most applications at a competitive cost. common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator Most applications require no lever, and no brackets are shaft over a set operating range. Rotation of the actuator shaft necessary. changes a magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. Honeywell’s industry-leading capabilities in research and development provide the customer with known quality and The IC, together with conditioning and protection circuitry, and support. the permanent magnet, is sealed in an IP67-qualified rugged package for durability in most harsh environments. FEATURES AND BENEFITS (=competitive differentiator) POTENTIAL APPLICATIONS  15 M cycle product life: Provides long life in the Transportation: application Position and movement detection of pedals, throttles, gear Solid-state Hall-effect technology: Provides non-contact shift, levers, steering, linkages, and hitches (trucks, buses, operation, long service life, low torque actuation and off-road vehicles, industrial/construction/agricultural reduces worn-out mechanisms