RS Components 电工电料 安全继电器 G7SA5A1B24DC 使用说明.pdfVIP

New Product Relays with Forcibly Guided Contacts G7SA Compact, Slim Relays Conforming to EN Standards • Additional Push-In Plus terminal sockets are used to save wiring work in comparison with traditional screw terminals. (Wiring time is reduced by 60%* in comparison with traditional screw terminals.) • Relays with forcibly guided contacts (EN 50205 Class A, certified by VDE). • Supports the CE marking of machinery (Machinery Directive). • Helps avoid hazardous machine status when used as part of an interlocking circuit. Note: Sockets are sold separately. • Four-pole and six-pole Relays are available. For the most recent information on models that have been • The Relay’s terminal arrangement simplifies PWB pattern certified for safety standards, refer to your OMRON website. design. • Reinforced insulation between inputs and outputs. Reinforced insulation between some poles of different polarity. * According to OMRON actual measurement data Be sure to read the Safety Precautions on page 9. Model Number Structure Model Number Legend Specify the power supply voltage (coil rated voltage) when ordering. Relays with forcibly guided contacts Sockets G7SA-@A@B@ P7SA-@@-@-@@ ⎯⎯⎯⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 1 2 3 1 2 3 4 5 6 1. NO Contact Poles 2. NC Contact Poles 1. Basic Model Name 4. LED Indicator 2: DPST-NO 1: SPST-NC P7SA: Socket for G7SA Blank: Without operation indicator LED/built-in diode 3: 3PST-NO 2: DPS