RS Components 电工电料 控制继电器 K8AKPA2380480VAC 使用说明.pdfVIP

New Product Three-phase Asymmetry and Phase-sequence Phase-loss Relay K8AK-PA Ideal for 3-phase Voltage Asymmetry Monitoring for Industrial Facilities and Equipment. • Greater resistance to inverter noise. • Monitor voltage asymmetry, phase sequence, and phase loss for three-phase 3-wire or 4-wire power supplies with just one Unit. Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply. • One SPDT output relay, 5 A at 250 VAC (resistive load). • World-wide power specifications supported by one Unit (switchable). • Relay status can be monitored using LED indicator. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to Safety Precautions on page 9. Refer to page 8 for commonly asked questions. Ordering Information List of Models Rated input* Model 3-phase 3-wire mode 200, 220, 230, 240 VAC K8AK-PA1 3-phase 4-wire mode 115, 127, 133, 138 VAC 3-phase 3-wire mode 380, 400, 415, 480 VAC K8AK-PA2 3-phase 4-wire mode 220, 230, 240, 277 VAC Note: Three-phase, three-wire or four-wire and the input range are switched using a DIP switch. * The power supply voltage is the same as the rated input voltage. Single K8AK Monitors 3-phase Power Supply with 3 or 4 Wires Monitoring Relays can be used to monitor 3-phase power supplies with 3 or 4 wires simply by changing DIP switch settings. Phase to phase voltage (3 wires) Phase to neutral voltage (4 wires) L1 L2 L3 L1 L2 L3 N