YM-WI-PE-008 A7 老化测试管理规定Burn in test administrative regulation.docVIP

文件名称：老化测试管理规定 文件编号：YM-WI-PE-008 版本：A7 File name: Burn in test administrative regulation Document number: YM-WI-PE-008 Version: A7 保密等级：三级普通，以上所有信息均为东莞英脉通信技术有限公司所有，不得外传 第 PAGE 8 页 共 NUMPAGES 8页 文件编号Document number YM-WI-PE-008 版本Version A7 生效日期Effective date 2020/06/23 保密等级Confidentiality level 三级普通Level 3 ordinary 老化测试管理规定 Burn in test administrative regulation 编制部门： Writing Department 工程部 拟 制: Draw up 骆懂平 审 核: Check 徐利 批 准: Approve 朱海斌 修订记录Revised record 修订日期Revision date 版本Version 修订内容 Content 2016/12/22 A0 首次发行 2017/06/23 A1 增加不良品判定与处理流程 2017/06/29 A2 增加可调电源调整要求 2017/06/30 A3 模板更新 2018/08/25 A4 全文增加英文 2018/10/11 A5 修订8.流程图 2019/03/15 A6 变更公司名 2020/06/23 A7 增加5.2.13老化比例 目的Purpose 为了规范产品老化操作步骤及老化环境要求，特制定本规范，严格按照本规范要求作业。 In order to standardize the operational steps of product burn in and the requirements of burn in environment, this specification is formulated and strictly followed. 适用范围Scope of application 公司老化房。 Company burn in room. 权责Responsibility 工程部门负责老化房设备的维护保养及操作，生产部门负责老化车的维护保养。 The engineering department is responsible for the maintenance and operation of the burn in room equipment, and the production department is responsible for the maintenance of the burn in car. 定义Definitions, 恒温老化房，也叫高温老化房和老化房，是针对高性能电子产品仿真出一种高温、恶劣环境测试的设备，是提高产品稳定性、可靠性的重要实验设备、是各生产企业提高产品质量和竞争性的重要生产流程，根据不同的要求配置主体系统、主电系统、控制系统、加热系统、温度控制系统、风力恒温系统、时间控制系统、测试负载等可检杳出不良品或不良件，是客户迅速找出问题、解决问题提供有效手段。 Constant temperature burn in room, also called high-temperature burn in room and burn in room, simulation is for high-performance electronic products give a kind of high temperature, bad environment testing equipment, is one of the important experimental equipment to improve product stability, reliability, and is the production enterprise important production process to improve product quality and the competitive, according to the requirements of different configuration subject system, the main electrical system, control system,