RS Components 电工电料 安全继电器 2904952 使用说明.pdfVIP

PSR-MS30 / PSR-MS35 SILCL IEC 62061 Safety relay for emergency stop and safety door monitoring Data sheet 106168_en_01 © PHOENIX CONTACT 2015-05-19 1 Description Intended Use Features The PSR-MS30 and PSR-MS35 safety relays can be used – Safety relay for emergency stop and safety door moni- to monitor two-channel signal generators, e.g., emergency toring stop buttons and safety door locking mechanisms, as well – Suitable up to category 4, PL e (EN ISO 13849-1), as to control actuators. SILCL 3 (EN 62061) The safety relays are equipped with an enabling current – Cross circuiting detection path that drops out without delay according to stop cate- – 1 two-channel sensor circuit gory 0 in accordance with EN 60204-1. – 1 undelayed enabling current path In the case of the PSR-MS30 safety relay, the enabling cur- – Fixed screw connection rent path is controlled automatically once the sensor circuit has been closed. – 6.8 mm housing width In the case of the PSR-MS35 safety relay, the enabling cur- rent path is controlled once the sensor circuit has been closed and the manual reset device (reset button) has first been pressed and released again (manual, monitored start). With the manual, monitored reset device, a machine start may not be triggered in accordance with EN ISO 13849-1. WARNING: Risk of electric shock Observe the safety instructions in the corresponding sectio