仪表相关汇总知识6tba removal syst.sd to ti.pptxVIP

TBA REMOVAL COLUMNSHUTDOWN TO TI TBA Removal Column Shutdown To TI PurposeA shutdown to TI of the TBA Removal Column System is when the column feed has stopped, the steam to the reboiler is stopped, all levels are pumped down to less than 10%, and all pumps are shut down. All valves to and from the system are to be manually closed. A shutdown to TI is done prior to the TBA Removal Column System clearing and safing process.ConditionsThe 2nd Stage Primary Fractionator is shutdown. Maintenance is required on the TBA Removal Column System. TBA Removal Column Shutdown To TI GUIDELINETHE TBA REMOVAL COLUMN CONTAINS A NUCLEAR MECHANICAL SHUTTER WHICH HAS TO BE CLOSED BEFORE ANY PERSONNEL ARE ALLOWED TO ENTER THIS VESSEL.NOTE: ALL HEAT TRACING MUST BE TURNED OFF WITHIN 24 HOURS AFTER A SHUTDOWN OF EQUIPMENT/PIPING HAS OCCURRED DUE TO POTENTIAL OF TBHP TRAPPED IN PIPING AND/OR EQUIPMENT RESULTING IN OVERPRESSURE OF PIPING/LOSS OF CONTAINMENT WITH ENVIRONMENTAL IMPACT, ECONOMIC IMPACT, PERSONNEL EXPOSURE AND/OR FIRE/EXPLOSION!TBA Removal Column Shutdown To TI Ensure the following items are completed: Close control valve on the TBA feed flow from the Second Stage Primary Fractionator. Shutdown the TBA Vacuum Package system. Close control valve on TBA to the 2nd IC4 Recycle Column from the side draw tray 34 on the TBA Removal Column. Close control valve on TBA to the 2nd Stage Primary Fractionator from side draw tray 34 on the TBA Removal Column. Shutdown the TBA Removal Side Draw Pumps 01P0353-A/B . Block in discharges on TBA Removal Side Draw Pumps 01P0353-A/B, unless repairs are required on TBA line to the 2nd IC4 Recycle Column and the 2nd Stage Primary Fractionator. Then block in at that remote location at column. Close control valve on S1 steam flow to the TBA Removal Preheater.TBA Removal Column Shutdown To TI Block in upstream control valve on S1 steam flow to the TBA Removal Preheater. Shutdown the TBA Removal Preheater Condensate Pump 01P0369-A/B. Block in contro