RS Components 其他网络设备 差分驱动芯片 LTC487CSW PBF 使用说明.pdfVIP

LTC487 Quad Low Power RS485 Driver EA U S DESCRIPTIOU F T RE ® ■ Very Low Power: ICC = 110µA Typ The LTC487 is a low power differential bus/line driver ■ Designed for RS485 or RS422 Applications designed for multipoint data transmission standard RS485 ■ Single 5V Supply applications with extended common-mode range (–7V to ■ –7V to 12V Bus Common-Mode Range Permits ± 7V 12V). It also meets RS422 requirements. GND Difference Between Devices on the Bus ■ Thermal Shutdown Protection The CMOS design offers significant power savings over its ■ Power-Up/Down Glitch-Free Driver Outputs Permit bipolar counterpart without sacrificing ruggedness against overload or ESD damage. Live Insertion/Removal of Package ■ Driver Maintains High Impedance in Three-State or The driver features three-state outputs, with the driver with the Power Off outputs maintaining high impedance over the entire com- ■ 28ns Typical Driver Propagation Delays with mon-mode range. Excessive power dissipation caused by 5ns Skew bus contention or faults is prevented by a thermal shut- ■