RS Components 其他网络设备 多路器开关芯片 NLAS52231MUR2G 使用说明.pdfVIP

NLAS52231 Ultra-Low 0.4 Dual SPDT Analog Switch with Overshoot Protection The NLAS52231 is a dual SPDT analog switch with overshoot protection on the signal lines. It is ideally suited for audio applications that require very low RON values for maximum signal transfer. The overshoot protection included in the NLAS52231 allows analog MARKING signals on the COM, NO or NC lines to swing safely above VCC DIAGRAM without incurring significant leakage. This feature provides added protection against undesirable leakage or damage to the device in the UQFN10 S2M event that an incoming audio signal spikes above its nominal level. CASE 488AT 1 The NLAS52231 features a wide VCC operating range, 1.65 V−4.5 V. It is capable of interfacing with control input select line S2 = Specific Device Code voltages, VIN, as low as 1.3 V for a VCC of 3.0 V. The NLAS52231 is M = Date Code/Assembly Location offered in a very small 1.4mm x 1.8mm 10−pin UQFN package. = Pb−Free Device (Note: Microdot may be in either location) Features • Ultra−Low RON: 0.4 at VCC = 4.2 V NC2 GND • Overshoot Protection: VIS can safely rise up to 1.1 V above VCC 7 6 • VCC Range: 1.65 V to 4.5 V • 1.4 x 1.8 x 0.55 mm UQFN10