基于单片机的智能热水器的设计与制作.pdfVIP

本 科 毕 业 论 文（设 计） 论文题目：基于单片机的智能热水器的设计与制作 兰州城市学院毕业论文（设计） 摘 要 现如今人们的生活越来越好，不同阶层的人对他们的生活品质也有了不一样的需求。 各种智能家电在人们的日常生活中占据了很大的比例，而与我们生活密切相关的各种热 水器也不断涌现。热水器在为用户提供便利的同时，人们也对其提出了更高的要求，尤 其在智能化和安全性方面。本论文以 STC89C51 单片机为核心，对热水器的控制系统进 行了研究，主要从硬件设计和软件设计两个方面展开。硬件系统包括此次热水器设计的 基础 STC89C51 单片机，配以电源电路为整个系统供电，同时设有按键电路、显示电路、 水温检测电路、报警电路、红外遥控电路等模块。软件系统设计主要采用 C 语言编程， 而后通过 KEIL 软件和 PROTEUS 软件的共同协作，对软件进行调试。旨在设计一款根 据用户习惯来自主设置预约时间和温度上下限，同时具有水位检测、声光报警、红外遥 控等功能的智能热水器。 关键词：单片机；传感器；智能热水器；控制 论文类型：工程设计 - I - 基于单片机的智能热水器的设计与制作 Abstract Nowadays, peoples lives are getting better and better, and people from different classes have different needs for their quality of life. Various types of intelligent appliances are taking up an increasing share in daily life, and various types of water heaters that are closely related to our lives are also popping up all over the place. While water heaters provide convenience to users, people also have higher requirements for them, especially in terms of intelligence and safety. In this thesis, the STC89C51 micro controller is used as the core to study the control system of water heater, mainly from two aspects of hardware design and software design. The hardware system includes the STC89C51 micro controller, which is the basis of this water heater design, with a power supply circuit to supply power to the whole system, as well as a button circuit, a display circuit, a water temperature detection circuit, an alarm circuit, an infrared remote control circuit and other modules. The software system is designed mainly in C programming language, and the software is debugged through the joint collaboration of KEIL software and PROTEUS software. We aim to design an intelligent water heater that can set the appoin