RS Components 其他网络设备 电机驱动芯片 TLE4208GXUMA1 使用说明.pdfVIP

1-A Quad-HBD (Quad-Half-Bridge Driver) TLE 4208 Overview Features • Driver for up to 3 motors • Delivers up to 0.8 A continuous • Optimized for DC motor management applications P-DSO-28-1, -6, -9 • Very low current consumption in stand-by (Inhibit) mode • Low saturation voltage; typ.1.2 V total @ 25 °C; 0.4 A • Output protected against short circuit • Error flag diagnosis • Overvoltage lockout and diagnosis • Undervoltage lockout • CMOS/TTL compatible inputs with hysteresis • No crossover current • Internal clamp diodes • Overtemperature protection with hysteresis and diagnosis • Enhanced power P-DSO-Package Type Ordering Code Package TLE 4208 G Q67007-A9335 P-DSO-28-6 Description The TLE 4208 is a fully protected Quad-Half-Bridge-Driver designed specially for automotive and industrial motion control applications. The part is built using the Siemens bipolar high voltage power technology DOPL. In a cascade configuration up to three actuators (DC motors) can be connected between the four half-bridges. These four half-bridges are configured as 2 dual-half-bridges, which are supplied and controlled separately. Operation modes forward (cw), reverse (ccw), brake and high impedance are invoked from a standard interface. The standard enhanced power P-DSO-28 package meets the application requirements and saves PCB-board space and costs. Furthermore the built-in features like diagnosis, over- and undervoltage-lockout, short- circuit protection, over-temperature protection and the very low quiescent current in stand-by mode will open a wide range of automotive and industrial applications. Data Sheet 1