交流变电站细节设计指南.docxVIP

\o AC substation detailed design guidelines: Best practice, dos and don’ts AC substation detailed design guidelines: Best practice, dos and don’ts 交流变电站详细设计指南：最佳实践、注意事项 By? \o Posts by Edvard Edvard? Substation Design Complexity 变电站设计的复杂性 Substation design is a very complex process that involves many professional engineers in many different areas. However, there are always few people who are leading the whole design process both from the technical and economical aspects. This technical article covers the selection of substation type (GIS or Air-insulated) and the detailed design of Air-insulated Substation. 变电站设计是一个非常复杂的过程，涉及许多不同领域的专业工程师。然而，从技术和经济两个方面领导整个设计过程的人总是很少的。本技术文章涵盖了变电站类型（GIS或空气绝缘）的选择以及空气绝缘变电站的详细设计。 AC substation detailed design guidelines: Best practice, dos and donts 交流变电站详细设计指南：最佳实践、注意事项 Many nations have their own safety rules and, because of their importance and legality as considered at the beginning of this article. The three component parts of the substation are defined as follows: Primary, Secondary, and Auxiliary System. 许多国家都有自己的安全规则，因为它们的重要性和合法性，正如本文开头所考虑的那样。变电站的三个组成部分定义如下：一次系统、二次系统和辅助系统。 Let’s remind ourselves of these three basic substation systems: 让我们提醒自己这三个基本的变电站系统： Primary System:?The primary system comprises all equipment that, in whole or in part, is in service at the highest operating voltage of the system. Secondary System:?The secondary system comprises all equipment that is used for the control (local and remote), protection, monitoring automation and measurement of the primary system. Auxiliary System:?Auxiliary systems are those which are required to enable the primary and secondary equipment to operate. 1.一次系统：一次系统包括全部或部分在系统最高工作电压下运行的所有设备。 2.二次系统：二次系统包括用于一次系统控制（本地和远程）、保护、监控自动化和测量的所有设备。 3.辅助系统：辅助系统是使一次和二次设备运行所需的系统。 Table of Contents: Selection Of Substation Type (GIS/AIS) Choosing Substation Layout: Primary Circuit Secondary Circuit Criteria for the Choice between Rigid or Flexible Conductor: Rigid Conductors Solution