ST汽车电子mcuSTM8方案.docx

PAGE 1 PAGE 1 ST汽车电子mcuSTM8方案 简介： STM8A 8位微掌握器STM8AF扩大了微掌握器在过程变化中的掌握功能，严格执行AEC-Q100汽车产质量标准，实现零缺陷率的目标。现在新系列产品已完全通过测试，工作温度达到 150°C,本次工艺变化不影响数据表的电特性和功能特性，客户无需更改软硬件设计。  基本特点：  意法半导体公司推出的STM8A是一款特地用于满意汽车应用的特别需求的8-位Flash微掌握器。 这些模块化产品供应了真数据EEPROM以及软件和引脚兼容性，适用的程序存储器尺寸范围为8KB至256KB和20至128-引脚封装。全部器件的工作电压均为3V至5V,并且其工作温度扩展到了145℃。  ●集成式真数据EEPROM  内部监控器电路：加电复位、窗式看门狗和标准看门狗定时器、电源掉电复位  集成式、工厂预校16MHz和128kHz RC振荡器  注入式鲁棒型I/O  ●开发周期短  产品线兼容性实现了应用可升级性  开发工具  Flash程序存储器，可以轻松实现软件开发和产品资格  ●应用力量和鲁棒性  高效的STM8内核：在16MHz的频率下可以实现10MIPS的性能  应用平安性高：独立的看门狗定时器、时钟平安系统  全部产品均具有LIN 2.0和自同步功能  ●设计寿命  新式内核和外设  先进技术  电源电压：3.3V和5V  工作温度：145 ℃  方案特点：  The STM8A-DISCOVERY helps you discover the STM8AF and STM8AL automotive microcontroller family features and develop your applications through two dedicatedapplication boards that can be connected together via a LIN network.  The STM8AF board can perform both CAN and LIN communications with the MCU powered at 5 V and is ready to be connected into a network with its integrated transceiver.  The STM8AL board manages LIN slave communication through its transceiver and uses a 4-digit alphanumeric LCD display with the MCU powered at 3.3 V, offering low energy power modes.  Both STM8AF and STM8AL boards include push buttons, LEDs, external connectors and allow various configurations to take advantage of the numerous capabilities of the microcontrollers.  On-board ST-LINK/V2 included for debugging and programming  ● Board power supply: through 5 V USB bus  ● Internal dual ST662A step-up converter building the 12 Vdc when powered by USB port  ● External application power supply VBAT （up to 14 Vdc）  ● 16 MHz HSE XTAL crystal oscillator  ● L99PM62GXP power management IC with LIN and high speed CAN with SPI control interface and high-side drivers  ● Two push buttons （USER1 and USER2）  ● Extension header for L99PM62GXP including relays, h