[嵌入式LINUX操作系统]sjf2440_UserGuide_v1.pdfVIP

S3C2440 RISC MICROPROCESSOR SJF2440 USER’S GUIDE SECJTAG FLASH(SJF) USER’S GUIDE (PRELIMINARY) DATE:SEPTEMBER 26, 2003 SJF2440 can program SMDK2440 flash memory (K9S1208,Intel E28F128,AMD29LV800BB) through JTAG port and read/write data from/to a specified address. SJF2440 VERSION HISTORY Version Description 0.1 - K9S1208 programming is supported. - AMD 29LV800BB programming is supported. - Intel E28F128 StrataFlash programming is supported. - External peripherals (PD6710,CS8900A and etc) read/write is supported . 1 SJF2440 USER’S GUIDE S3C2440 RISC MICROPROCESSOR INSTALLING GIVEIO.SYS In windows NT/2000/XP, any application can’t access the I/O such as the parallel port. So, GIVEIO.SYS enables SJF.exe to access the parallel port without any memory fault. In windows 95/98, GIVEIO.SYS isn’t needed. For Windows* 2000, use the following procedure: 1) Login as administrator 2) Copy the giveio.sys file to %systemroot%\system32\drivers. 3) Choose Control Panel, and choose Add/Remove Hardware. 4) Select Add/Troubleshoot a device 5) Select Add a new device and choose Next, and select No, I want to select the hardware from a list 6) Select Other devices and choose Have Disk.... 7) Choose Browse..., locate the folder where giveio.inf file. 8) Complete the remained process. For Windows* NT, use the following procedure: 1) Login as administrator. 2) Open a DOS command window. 3) Copy giveio.sys to %systemroot%\system32\drivers. 4) Install the driver using the instdrv utility specifying the driver name and the FULL PATH NAME to the giveio.sys file. instdrv giveio c:\winnt\system32\drivers\