大功率横流co激光器升级改造项目.docxVIP

大功率横流 CO 激光器升级改造项目 2 Power Cross-Flow CO2 Laser Upgrading Projects 1．项目概要 通过对国内大功率横流 CO2 激光器使用单位的调查和技术分析，结合我公司在横流 CO2 激光器方面的技术优势，我公司决定开展部分在线激光器的升级改造项目。 希望与各激光设备的使用单位进行充分的技术交流，通过技术服务，对激光设备的 关键部位进行技术改造。 一方面， 可大幅提升激光器的输出功率 (~2 倍) 和运行稳定性， 提高常规激光淬火和激光熔覆加工业务的生产效率；另一方面，可提高低阶模的输出效 2率，充分发挥大功率横流 CO 激光器的加工潜力， 帮助国内各激光加工单位拓展激光加工 2 领域，如激光焊接。 1． Introduction Through the cross-flow of domestic high-power CO2 laser units use the investigation and technical analysis, the combined company in the cross-flow CO2 lasers technical superiority, I decided to conduct some on-line laser upgrading projects. With the hope that the use of laser equipment units sufficient technical exchanges, technical services, the key parts of laserequipment for technological transformation. On the one hand, can dramatically enhance the laser output power to 2 times) and operating stability, enhance conventional laser hardening and laser cladding processing business productivity on the other hand, can increase the output of low-efficiency and give full play to Power cross-flow CO2 laser processing potential of the domestic help expand the laser processing units laser processing areas, such as laser welding. 2．市场调查分析 目前，通过对国内千瓦级大功率 CO2 激光热处理和激光熔覆设备的用户进行调查， 很多用户反映设备性能较差，大部分情况为：设备稳定性很差，年故障次数 5 次以上； 激光器使用一至两年后出现功率输出变小、模式变差，因此造成大部分成套设备经常处 于低性能状态，甚至停运。主要问题集中在激光器的关键技术指标达不到标准。 2． Survey of the market At present, through the domestic kilowatt-class high-power CO2 laser heat treatment equipment and laser cladding of the user survey, many users reflect the poor performance of equipment, the majority of cases are: stability of poor equipment, five times the number of failures in more than the use of lasers One to two years after the power output smaller model deteriorate, resulting in complete sets of equipment most often in the low performance, or even outages. Laser focus on key issues in the key indicators-standard technology. 千瓦级大功率 CO2 激光器存在的主要问题及描述 序号 1 2 3 4 主要问题 激光功率“大打 折扣”，影响加工 效率 低阶模状态性能 差，无法