七段数码管显示程序.docxVIP

附录 A 八位七段数码管显示程序 library ieee; use led is port( clk : in std_logic; --Clock Signal data_in : in std_logic_vector(7 downto 0); --data bus ledag : out std_logic_vector(6 downto 0); --定义七位输出信号sel : out std_logic_vector(2 downto 0) --ledag Select ); end led; architecture behave of led is signal dcount : std_logic_vector(2 downto 0); signal adh,adl : std_logic_vector(6 downto 0); signal adcount : std_logic_vector(7 downto 0); signal din_h,din_l : std_logic_vector(3 downto 0); signal coclk : std_logic; begin process(clk) --out enable signal begin if(clkevent and clk=1) then if adcount= t