SGS-THOMSON M5 4 7 4HC3 7 4 M54 74HC534 March 1993 HC374 NON INVERTING - HC534 INVERTING OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT handbook说明书用户手册.PDF

M54/74HC374 M54/74HC534 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT HC374 NON INVERTING - HC534 INVERTING .HIGH SPEED fMAX = 77 MHz (TYP.) AT VCC = 5 V .LOW POWER DISSIPATION ICC = 4 µA (MAX.) AT TA = 25 °C .HIGH NOISE IMMUNITY VNIH = VNIL = 28 % VCC (MIN) .OUTPUT DRIVE CAPABILITY B1R F1R 15 LSTTL LOADS (Plastic Package) (Ceramic Package) .SYMMETRICAL OUTPUT IMPEDANCE IOL = IOH = 6 mA (MIN.) .BALANCED PROPAGATION DELAYS tPLH = tPHL .WIDE OPERATING VOLTAGE RANGE M1R C1R VCC (OPR) = 2 V TO 6 V (Micro Package) (Chip Carrier) .PIN AND FUNCTION COMPATIBLE ORDER CODES : WITH 54/74LS374/534 M54HCXXXF1R M74HCXXXM1R M74HCXXXB1R M74HCXXXC1R DESCRIPTION The M54/74HC374, M54/74HC534, are high speed while high level, the outputs will be in a high imped- CMOS OCTAL D-TYPE FLIP FLOP WITH 3-STATE ance state. The output control does notaffect the in- 2 OUTPUTS fabricated with in silicon gate C MOS ternal operation of flip-flops. That is, theold data can technology. They have the same high speed per- be retained or the new data can be entered even formance of LSTTL combined with true CMOS low while the outputs are off. The application engineer power comsuption. These8-bit D-type flip-flops are has a choice of combination of inverting and non-in- c