leawin领域S16K. NW Survivability 2014-0306说明书用户手册.ppt

Revision Picture was revised. 23(Page 15) Mar 6 Explanation was revised. 42 to 45(Page 20 to 23) First edition - Oct 15 Date Change No. * * * * * * * * * * * * * * * * * * KX-NS1000 Step by Step GuideNetwork Survivability March 6, 2014 Specifications are subject to change without notice. Panasonic System NetworksPBX SE team Back-up is available automatically for SIP trunk incl E1 / PRIadapter, KX-NT/UT IP-phone and one look connection. SIP Trunk PRI/E1 or SIP Provider Trunk Adaptor KX-NS1000 (1st)Master KX-NS1000 (2nd)Back-up Master KX-NT KX-UT Trunk Adaptor KX-NS1000Master KX-NS1000Back-up Master KX-NT KX-UT After master PBX stops working, SIP Trunk One-Look AK One-Look AK 1. Introduction Back-up master PBX works as slave PBX usually.But it works as master PBX after master PBX stops working. KX-NT KX-UT KX-NT KX-UT One-Look AK One-Look AK PRI/E1 or SIP Provider 2. Table of Contents Programming for Back-up of KX-NT/UT phone 4 Programming for Isolated mode 5 Programming for Back-up of SIP trunk 3 Programming for Back-up Master 2 Specifications 1 Explanation Chapter Chapter 1Specifications Back-up is available automatically for SIP trunk inclE1 / PRI adapter and KX-NT/UT IP-phone. SIP Trunk PRI/E1 Adapter Trunk Adaptor KX-NS1000 (1st)Master KX-NS1000 (2nd)Back-up Master KX-NT KX-UT PRI/E1 Trunk Adaptor KX-NS1000Master KX-NS1000Back-up Master KX-NT KX-UT After master PBX stops working, IP address of 1st PBX (Master) and 2nd PBX (Back-up) can be assigned to NT.1st PBX informs IP address of 2nd PBX to UT during working. IP address of SIP server is pre-programmed to 2nd PBX also for back-up during working. If 2nd PBX cannot communicate with 1st PBX, 2nd PBX starts working for SIP provider. If NT/UT cannot communicate with 1st PBX, NT/UT starts working with 2nd PBX. SIP Trunk or SIP Provider One-Look AK One-Look AK AlternativeSolution forW-CPUW-Power Supply or SIP Provider 11. Back-up of SIP trunk and KX-NT/UT One-Look AK One-Look AK Back-up