RockwellAutomation罗克韦尔Bul. 1494F 30A,60A,100A Fixed-Depth Disconnect Switch Installation Instructions用户手册说明书.pdf

Installation Instructions Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch (Cat 1494F-N30; 1494F-N60; 1494F-N100; Series C) WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants. Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product. WARNING: The following procedures are critical to the proper operation of the disconnect handle and switch. Failure to follow these steps can result in damage to the equipment and/or serious injury or death to the operator. Tools Needed: 7/16 Wrench/Driver, 3/8 Wrench/Driver, 5/16 Nut Driver, Slotted Screwdriver Table of Contents Page Installation Guide 2 Fuse Block Adapter Plate Installation (Optional)3 Disconnect Switch Installation4 Fuse Clip Installation5 Door Catch Bracket Installation6 Lug Connectors7 Wire Torque7 Wiring Diagrams7 Accessories8 2 Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch Installation Guide Enclosure without Pre-Drilled Handle Cutout 1 Locate Handle Option 1 C B Option 2 C B A