线路制作教程自动添加栅栏.pdfVIP

Some people here have noted t some of the routes being made lack fen where they should be. In particular, this is a problem for routes made in countries where railroads are fenced o s a matter of course. The reason way routes are not being fenced is obvious - it is too time consuming to line up every piece of fence. 有些人注意到有些路线应该有栅栏但是却没有。尤其是一个铁路系统通常都会设栅栏的国家里，这是一 个问题。不设防护栏的理由很明显，把每个防护栏排列成行相当费时间。 Well, I found a better way. I thought of treating fen as a gantry, and placed the following lines y gantry.dat file: 现在我发现一种很好的办法，我把防护栏作为跨轨信号竿来设计，把以下的信息放在 文件夹里 GantrySet( 信号竿： Name ( ROW Wire Fen ) 名称：ROW Wire Fen Style () 格式：( Separation ( 10 ) 间距：10 GantryTable ( 1 GantryTableEntry ( Filename ( WireFence10m.s ) 文件名: Distance ( 20 ) 距离： ) ) ) I set the distance to 20 so t a right-of-way up to 4 tracks wide could be fenced in. The theory was sound, but in practice I ended up with fen across the tracks because the length of the fen is he x direction. 我将距离设为 20，这样的话就可以防护4 条轨道，这个在理论上是可以的，但是实际上我撤消了铁轨 上的栅栏因为栅栏的长度方向在X 轴 No problem. I manually edited the sh and .sd files to get the length he z-axis(this was the hard part because there are normal vectors here), and renamed the new sh ROW_WireFence10m.s. I then added the following line to my gantry.dat file: 没问题，我手工画了个图，把长度的方向放在Z 轴 （这是较难的部份，因为本有些向量在那），因此重 新命名了以上文件名：ROW_WireFence10m.s，所以在文件里加了以下线路 GantrySet( Name ( RO