EMERSON艾默生 Manuals Type PBE-5 Pressure Builder Economizer Regulator Installation Instructions, Cash Valve-EN说明书用户手册.pdf

CASH VALVE TYPE PBE-5 PRESSURE BUILDER/ECONOMIZER REGULATOR INSTALLATION INSTRUCTIONS Before installation, these instructions must be read carefully and understood DESCRIPTION CONSTRUCTION The Type PBE-5 regulator is a fully automatic See component description for materials of pressure builder/economizer valve designed construction. for cryogenic liquid systems. It is equipped with a non-adjustable/fixed set point economizer. OPERATING INSTRUCTIONS The valve is also equipped with bullnose tube connections that optionally incorporates Adjusting the Pressure Build Set Pressure a check valve to prevent backflow into the To increase the set pressure, turn the adjusting economizer. An indicating adjustment screw screw clockwise (into the spring chamber). provides an easy field adjustment reference. To decrease the pressure, turn the adjusting screw counter-clockwise (out of the spring SPECIFICATION DATA chamber). Service: Cryogenic Liquids The Economizer Set Pressure is fixed. Sizes: 0.839 diameter 316L SST Tube The Economizer will begin to open between Connections: SST Bullnose Tube/Union Nut approximately 8-11 psi above the Pressure ½ internal NPT Build set point. Body material: ASTM CA377 Brass Forging Temperature rating: MAINTENANCE INSTRUCTIONS -320°F (-196°C) to +150°F (66°C) Maximum initial pressure: CAUTION 650 psi (45 bar) Before attempting to replace any spare parts, Capacity: For specific capacity information, be sure to shut off all pressure connections to consult the factory. the va