EMERSON艾默生 Manuals Type PBE-4 Pressure Builder Economizer Regulator Installation Instructions, Cash Valve-EN说明书用户手册.pdf

CASH TYPE PBE-4 PRESSURE BUILDER/ECONOMIZER REGULATOR INSTALLATION INSTRUCTIONS Before installation, these instructions must be carefully read and understood. DESCRIPTION The Type PBE-4 regulator is a fully automatic FIGURE 1 pressure builder/economizer valve designed for cryogenic liquid systems. It is equipped with a fully adjustable economizer so the economizer set point can be custom tuned for your system. The version that is equipped with tube connections incorporates a check valve to prevent backflow into the economizer. Economizer Assembly EC OUTLET SPECIFICATION DATA PB INLET PB OUTLET Service: Cryogenic Liquids SIZES: 1/2 NPT or 0.839 diameter SST Tube Connections: Threaded or SST Tube Body Material: ASTM B62 Bronze Casting Temperature Rating: Pressure -320°F (-196°C) to +150°F (66°C) Builder Assembly Maximum Initial Pressure: 650 psi (4.48 MPa) Available Pressure Sets: 110 psig 150 psig Capacity: For specific capacity information, consult the factory. OPERATING INSTRUCTIONS MAINTENANCE INSTRUCTIONS Adjusting the Set Pressur