Bonfiglioli邦飞利 ACT ACU ANG AEC变频器安装手册通过安装进料 说明.pdf

ACTIVE and ACTIVE Cube Installation manual Feed-through mounting Frequency Inverter 230V / 400V 0.55 kW ... 132.0 kW Feed-through mounting of frequency inverters ACT and ACU This installation manual describes the feed-through mounting of the frequency inverter series ACT and ACU (type designations ACT x01-xx D, ACU x01-xx D). It complements the documentation by the information relating to the variant details. The feed-through mounting reduces the heat load of the control cabinet by means of thermal separation of the heat sink. Instead of standard fixtures the scope of supply of the feed-through mounting devices contains fixing plates for inserting into the heat sink, back panels for air flow guiding and an adhesive seal. Warning! • The safety instructions and information on use contained in this manual and in the operat- ing instructions manual on the attached CD must be complied with strictly during installa- tion and commissioning of the frequency inverter. • According to the application and optional components refer to additional manuals on CD. Non-compliance with the warnings and precaution described will result in death, serious in- jury or material damage. • The present documentation is applicative for qualified staff that is familiar with the installa- tion, assembly, commissioning and operation of the frequency inverter and has the proper qualification for the job. Safe operation of the frequency inverter requires that the documentation and the device specification be complied with during installation and start of operation. For specific areas of ap