ABB Data sheet - FPD170 orifice carrier assemblies Differential pressure – primary flow element 数据表(英语)说明书用户手册.pdf

Data sheet DS/FPD170–EN FPD170 orifice carrier assemblies Differential pressure – primary flow element Simplified installation of orifice plates Measurement made easy Simplified installation Range of carrier designs and orifice plates available — tapping points are integrated within the carrier — designs available for most orifice plate applications Designed to ISO 5167, PD ISO/TR 15377 or R W Miller Extensive range of construction materials available (depending on plate variant) — from carbon and stainless steel to specialist alloys — other designs available on request FPD170 orifice carrier assemblies Differential pressure – primary flow element Introduction RTJ female integral carrier — a one-piece carrier designed to fit between RTJ flanges; with The ABB FPD170 series of orifice carriers is available for line integral fixed-orientation tappings and a female RTJ profile sizes 25 to 1000mm (1 to 40 in.) as standard, with larger sizes to accept RTJ ring gaskets available upon request. The carriers can measure a wide range of liquids and gases, and also steam. The carrier variants are as follows: Split ring carrier — two shells clamp the plate, but allow the tappings to be rotated to the desired orientation The features and benefits of ABB FPD170 orifice carriers include: — Mature, established technology — Available in sizes from DN25 to DN1000 (1 to 40 in.) and