QEMU平台构建基于PowerPC单核SoC并运行DES程序.pptxVIP

会计学1QEMU平台构建基于PowerPC单核SoC并运行DES程序 outlineppc405 boardDMA and TimerMemory Mapbootloader问题qemu仿真ppc405运行des程序第1页/共12页 Boardppc405_uc.c文件（QEMU PowerPC 405 embedded processors emulation）第2页/共12页 DMA DMA controllerDMA结构体定义接口，功能没有实现第3页/共12页 Timerppc405_uc.c 文件中有 General purpose timers该模块和DMA一样定义了接口没有实现功能。第4页/共12页 Memory Map * - PowerPC 405EP CPU * - SDRAM (0 * - Flash (0xFFF80000) * - SRAM (0xFFF00000) * - NVRAM (0xF0000000) * - FPGA (0xF0300000) * - GPT (General purpose timers) (0xef600000) * - Serial ports (0xef600300) * - OPB arbitrer (0xef600600) * - IIC controller(0xef600500) * - GPIO (0xef600700)第5页/共12页 bootloaderram_addr_t ppc405_set_bootinfo (CPUPPCState *env, ppc4xx_bd_info_t *bd, uint32_t flags){ CPUState *cs = CPU(ppc_env_get_cpu(env)); ram_addr_t bdloc; int i, n; /* We put the bd structure at the top of memory */ if (bd-bi_memsize = 0L) bdloc = 0L - sizeof(struct ppc4xx_bd_info_t); else bdloc = bd-bi_memsize - sizeof(struct ppc4xx_bd_info_t); stl_be_phys(cs-as, bdloc + 0x00, bd-bi_memstart); stl_be_phys(cs-as, bdloc + 0x04, bd-bi_memsize); stl_be_phys(cs-as, bdloc + 0x08, bd-bi_flashstart); stl_be_phys(cs-as, bdloc + 0x0C, bd-bi_flashsize); stl_be_phys(cs-as, bdloc + 0x10, bd-bi_flashoffset); stl_be_phys(cs-as, bdloc + 0x14, bd-bi_sramstart); stl_be_phys(cs-as, bdloc + 0x18, bd-bi_sramsize); stl_be_phys(cs-as, bdloc + 0x1C, bd-bi_bootflags); stl_be_phys(cs-as, bdloc + 0x20, bd-bi_ipaddr); for (i = 0; i 6; i++) { stb_phys(cs-as, bdloc + 0x24 + i, bd-bi_enetaddr[i]); }第6页/共12页 bootloader stw_be_phys(cs-as, bdloc + 0x2A, bd-bi_ethspeed); stl_be_phys(cs-as, bdloc + 0x2C, bd-bi_intfreq); stl_be_phys(cs-as, bdloc + 0x30, bd-bi_busfreq); stl_be_phys(cs-as, bdloc + 0x34, bd-bi_baudrate); for (i = 0; i 4; i++) { stb_phys(cs-as, bdloc + 0x38 + i, bd-bi_s_version[i]); } for (i = 0; i 32;