自动化专业英语课后习题答案.pptxVIP

会计学1自动化专业英语课后习题答案 1.1 Introduction to Process Control2. Put the following into chineseperformance 性能 process plant 过程系统 process control 过程控制 reference 参考 operating conditions 运行条件 disturbance 扰动，干扰 Automatic control 自动控制Manual control 手动控制，人工控制Perfect control 完美控制Feedback control 反馈控制Set point 设定值Controlled variable 被控变量2第1页/共21页 3 Put the following into English带搅拌加热器 stirred-tank heater密度 density比热容 specific heat capacity热容 heat capacity热损失 heat loss负反馈 negative feedback正反馈 positive feedback前馈控制策略 feedforward control strategy控制器 controller31.1 Introduction to Process Control第2页/共21页 1.2 What is feedback and what are its effects?2. Put the following into chineseStability 稳定性 sensitivity 灵敏度Actuator 执行器 sensor 传感器 Transducer 传感器 linear quadratic regulator 线性二次调节器Linear quadratic 线性二次型 controller 控制器Simulation 仿真 temperature 温度Flow rate 流速 pressure 压力Concentration 浓度 level 液位，液面4第3页/共21页 1.2 What is feedback and what are its effects?3 Put the following into English幅值 magnitude 相角 phase闭环 closed-loop 开环 open-loop可编程逻辑控制器programmable logic controller (PLC)模型 model 黑箱 black-box经验模型 empirical model 比例 proportional比例加微分 proportional plus derivative (PD)比例加积分 proportional plus integral (PI)比例加积分加微分 proportional plus integral plus derivative (PID)5第4页/共21页 1.3 Stability of closed-loop control systems2. Put the following into chineseOscillatory 振动的 damp 衰减Unstable 不稳定地 complex number 复数Controlled variable 被控变量Manipulated variable 操纵变量Load variable 负载变量 error 误差Process transfer function 过程传递函数Pole-zero cancellation 零极相消Self-regulating 自调节6第5页/共21页 1.3 Stability of closed-loop control systems3 Put the following into English判据 criteria 拉氏变换 Laplace transform零点zero-point 极点 pole-point特征方程 characteristic equation 系数 parameter/coefficient偏差变量 deviation variable 比较器 comparator伺服问题 servo prob