受压构件承载力计算新的.pptxVIP

  • 2
  • 0
  • 约4.63千字
  • 约 133页
  • 2023-01-31 发布于四川
  • 举报
第六章 受压构件承载力计算;6.1 概述; 要说明的是,实际工程中真正的轴心受压构件是没有的。由于施工的偏差及混凝土的不均匀性和钢筋的不对称性,都将使构件产生初始偏心距,所以即时设计时理论计算是轴心受压构件, 也不一定为轴心受压构件,但对于一些偏心距较小的构件,可按轴心受压构件计算。 受压构件在实际工程中应用比较广泛。;第六章 受压构件承载力计算;New Antioch Bridge. This high-level bridge completed in 1979 replaced an older truss-type lift bridge crossing the main shipping channel. The bridge consists of continuous spans of variable depth in Cor-Ten steel. Maximum span is 460 ft, and maximum height of roadway above water level is 135 ft. (California);Elevated highway. Taken during construction. Designed as concrete box girders, these bridges were cast in

文档评论(0)

1亿VIP精品文档

相关文档