TMP007 Calibration Guide - 德州仪器 说明.docxVIP

TEXAS INSTRUMENTS Users Guide SBOU142-August 2014 TMP007 Calibration Guide The TMP007 is a thermal infrared (IR) sensor sensitive to radiation in the IR spectrum from approximately 4- to 16- μm wavelength.The TMP007 measures the temperature of an object by sensing the infrared radiation emitted by the object and converting the voltage generated to a digital reading of the temperature. Calibration is the process of correlating the radiation emitted by the object to the digital value in the object temperature register based the sensor voltage and the die temperature generated by the TMP007. This guide covers the basic principles of calibration: generating a data set for calibration, common errors in calibration, generating the calibration coefficients and verifying the calibration coefficients.While intended for the TMP007, many of the principles and techniques can be applied to the TMP006 thermopile sensor. This guide is intended to be used with the TMP007 data sheet (SBOS685 ). WARNING: EXPORT NOTICE Recipient agrees to not knowingly export or re-export, directly or indirectly, any product or technical data (as defined by the u.S., EU,and other Export Administration Regulations) including software, or any controlled product restricted by other applicable national regulations, received from Disclosing party under this Agreement, or any direct product of such technology, to any destination to which such export or re-export is restricted or prohibited by U.S.or other applicable laws, without obtaining prior authorization from U.S. Department of Commerce and other competent Government authorities to the extent required by those laws. This provision shall survive termination or expiration of this Agreement. According to our best knowledge of the state and end-use of this product or technolog