失败模式及效应分析.pptVIP

Furnace Test Background Every Residential Gas Furnace is tested ( +350k / year) Each test has different pass / fail criteria (based on model) (aka Test Parameters These are controllable by Test Engineer - not operator. The cables, door clip, etc that are used to connect the unit to the tester were listed as (S) SOP as they are not “knob variables that can be adjusted to have an effect on the outcome of a test. Obviously, if installed incorrectly or in wrong location the effect will be test failure. Some cables are Poka Yoke and some are not. The ampclamp can snap around any wire in any lo