ISO 10414-1-2008 石油天然气工业-钻井液现场测度-第1部分：水基钻井液.pdfVIP

INTERNATIONAL ISO STANDARD 10414-1 Second edition 2008-03-15 Petroleum and natural gas industries — Field testing of drilling fluids Part 1: Water-based fluids Industries du pétrole et du gaz naturel — Essais in situ des fluides de forage Partie 1: Fluides aqueux Reference number ISO 10414-1:2008(E) © ISO 2008 ISO 10414-1:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopy