ISO 15614-1-2012 金属材料焊接工艺规范和评定.pdfVIP

INTERNATIONAL ISO STANDARD 15614-1 First edition 2004-06-15 AMENDMENT 2 2012-02-15 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys AMENDMENT 2 Descriptif et qualification dun mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification dun mode opératoire de soudage — Partie 1: Soudage à larc et aux gaz des aciers et soudage à larc des nickels et alliages de nickel AMENDEMENT 2 Reference number ISO 15614-1:2004/Amd.2:2012(E) © ISO 2012 ISO 15614-1:2004/Amd.2:2012(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2012 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56  CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@ Web Published in Switzerland ii © ISO 2012 – All rights reserved