奥的斯电梯资料.docVIP

Brake Release Electrical Board (BRE)Startup RoutineOTISCentral East Europe Area FOD BerlinField component manualPart: 4 – D1No.: GAA26800BG1 Brake Release Electrical Board (BRE) Startup Routine OTIS Central East Europe Area FOD Berlin Field component manual Part: 4 – D1 No.: GAA26800BG1 II Vintage: 01 / 1 Page: SEITE 2 / ANZSEITEN 5 Date: March,1 2000 Brake Release Electrical Board Authorization Date D1: 16.02.2000Running on PCB: GAA26800BG1 Authorization Date D1: 16.02.2000 Running on PCB: GAA26800BG1 Software Version: - - - Document Revision : Date Author Page Comment 1.03.2000 W. Schoppa 1-5 Original Version Copyright 2000, OTIS GmbH Co. OHG Berlin. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of OTIS GmbH Co. OHG. VERZEICHNIS \o 1-3 1 Introduction SEITENREF _Toc476468604 \h 3 2 Abbreviations SEITENREF _Toc476468605 \h 3 3 Pre-Power Checks SEITENREF _Toc476468606 \h 3 4 Power Checks SEITENREF _Toc476468607 \h 3 5 LED Checks SEITENREF _Toc476468608 \h 3 6 Adjustment and Calibration SEITENREF _Toc476468609 \h 4 6.1 Parameter Adjustment and Description SEITENREF _Toc476468610 \h 4 7 Trouble Shooting SEITENREF _Toc476468611 \h 5 Introduction This manual covers instructions for checkout of the Brake Release Electrical Board and adjustment / calibration hints of the BRE. Abbreviations TCB Traction Control Board SPB Service Panel Board SVT Service Tool Pre-Power Checks Inspect all equipment for signs of damage, loose connections or other defects. Power Checks connector measurement points voltage - reference point voltage (tolerance) P 1 P1:5 – P1:1 12VDC (10,2 – 13,8V) (battery) P 1 P1:4 – P1:2 12VDC (10,2 – 13,8V) (battery) P 2with pressed button BRB1 P2:2 – P2:5 12VDC (10,2 – 13,8V) (battery) P 2 P2:4 – P2:5 12VDC (10,2 – 13,8V) (battery) P 4 P4:1 – P4:3 110 VDC +/- 10% (brake) 75VDC +/- 10% (brake hold voltage) LED Checks General: The states of LED′s will be defined