Schneider Electric施耐德SpaceLogic KNX- DALI Gateway Basic REG-K 1 16 64-Operating instructions (EN)安装和.pdf

© Schneider-Electric 2014V6725-563-0211/21 en Starting up the gateway Getting to know the Gateway Several steps are necessary to start up the gateway fully: The KNX DALI Gateway Basic REG-K/1/16/64 (referred 1 Wire the DALI segment to below as the gateway) connects the KNX bus to the 2 Connect the gateway to DALI and KNX bus DALI bus. Lights with DALI electronic ballasts can there- SpaceLogic KNX DALI Gateway Basic fore be integrated into a complete KNX system in the 3 Connect the gateway to the mains voltage REG-K/1/16/64 form of a subsystem and operated using the wide range 4 Load the ETS application programme (.knxprod) of KNX devices available. and install the ETS app (.etsapp) Operating instructions The device converts switching and dimming c