RockwellAutomation罗克韦尔CENTERLINE 2100 MCC Stainless Steel Enclosures for NEMA Type 4 Applications用户手.pdf

Technical Data CENTERLINE® Motor Control Centers Stainless Steel Enclosure for NEMA Type 4 Applications Application Stainless steel motor control center (MCC) enclosures are designed for indoor or outdoor use, primarily to provide a degree of protection against windblown dust and rain, splashing water and hose-directed water. They are designed to remain undamaged by the formation of ice on the enclosure. The stainless steel enclosures meet hose-down, external icing, rod entry and rust-resistance design tests. This design is acceptable for NEMA Type 4 applications, per NEMA Standard 250. Two applications for these enclosures are the food processing and dairy industries. Construction Figure 1 Stainless Steel Construction • Stainless steel outer sheeting is constructed around a 20” (508 mm) deep inner section. The outer sheeting increases the overall depth by 10” (254 mm) and the width by 5” (127 mm). • The interior section(s) can be 20” (508 mm), 25” (635 mm) or 30” (762 mm) wide. For overall enclosure dimensions, refer to page 2. • The outer door and the MCC unit door provide two-door protection