ASME BPE-2022美国机械工程协会生物加工设备标准-2022.pdfVIP

ASME BPE-2022 (Revision of ASME BPE-2019) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2022 (Revision of ASME BPE-2019) Bioprocessing Equipment AN INTERNATIONAL STANDARD Two Park Avenue • New York, NY • 10016 USA x Date of Issuance: April 29, 2022 The next edition of this Standard is scheduled for publication in 2024. This Standard will become effective 6 months after the Date of Issuance. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Periodically, certain actions ofthe ASME BPECommittee may be publishedas Cases. Cases and interpretations are publishedonthe ASME website under the Committee Pages at / as they are issued. Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly publisheditems, orto correcttypographical orgrammatical errors incodes and standards. Such errata shall be used on the date posted. The Committee Pagescan befound at /.There is an option availableto automatically receivean e-mail notification when errata are posted to a particular code or standard.This option can befound on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section. ASME is the registered trademark of The American Society of Mechanical Engineers. This international code or standard was developed under procedures accredited as meetingthe criteria for American National Standards anditisanAmerican NationalStandard.The standardscommitteethat approvedthe codeorstandardwas balancedto ensurethat