数字化焊接车间设备监控与管理下位机系统设计.pdfVIP

摘 要 为了有效地管理车间内的焊接设备，提高产品的质量及生产效率，有必要开发 出相应的车间管理辅助设备。此外，随着信息技术的发展，计算机的价格越来越便 宜，在先进的制造车间往往不再是各台设备的独立工作，而是通过新技术使各设备 能够协调统一起完成一系列的工作，从而实现设备的有效利用及生产率的提高。 本系统上位机采用组态王开发监控软件，该设备具有较强的扩展能力，拥有较 多接口和内置部件。同时系统自带较多内置功能。这些都使得该设备具有较为明显 的优势，性能好，处理效率高。同时性价比高，能够满足我们的需求。同时其作为 我国自主研发的研究，具有很好地性能以及适合我国技术人员的思维模式。同时该 软件具有诸多良好的性能，能够为我们设计减少很多工作量和提高效率。 关键词：组态王 监控系统 PLC 设计 Abstract In order to effectively manage the welding equipment in the workshop, improve the quality of products and production efficiency, it is necessary to develop the corresponding auxiliary equipment workshop management. In addition, with the development of information technology, the prices of computers are getting cheaper, in advanced manufacturing workshop is often no longer the independent work of the equipment, but through new technologies enable the equipment can improve the system to coordinate together to complete a series of work, so the implementation of effective utilization and productivity. The computer system uses KingView to develop a monitoring software, the device has strong expansion ability, has many interfaces and built-in parts. At the same time the system comes with more built-in functions. All these make the equipment has obvious advantages, good performance and high processing efficiency. At the same time cost- effective, able to meet our needs. At the same time as the research of our countrys independent research and development, has a very good performance and suitable for our countrys technical personnels thinking mode. At the same time, the software has a lot of good performance, which can reduce a lot of work