二零二三年 优质公开课ExpandingtheHuaweiEnterpriseNetwork.pptxVIP

《HCNA-HNTD Fast Training》 Expanding the Huawei Enterprise Network 课程团队：叶礼兵 王苏南 张悦 吴伟强 Foreword As more and more end stations in the form of host devices, networkable printers other similar products are introduced into the local area network, an increase in the density of devices results in a limitation in terms of port interfaces, along with problems of collisions within any shared network topology. Switching has evolved as the means for supporting this growth. VRP is used within Huawei products as a means to configure and operate such managed devices for which familiarity and hands-on skills must be developed.Page 2 Objectives Upon completion of this section, trainees will be able to:Explain the role switches play in the Ethernet networks.Describe the difference between collision and broadcast domains.Explain the general operation of VRP in Huawei products.Page 3 Application of Switching DevicesPage 4Host AHost DHost CHost BSwitch BSwitch ARxTxSwitches generate multiple collision domains. Application of Routing DevicesPage 5Switch BRTAHost CHost DSwitch AHost AHost BGateway devices such as routers generate broadcast domains. Introduction To VRPPage 6WLAN/WWANSwitchingUnified ManagementUTMSecurityRoutingVRP is the platform on which many Huawei products operate. VRP TimelinePage 7VRP 1VRP 2VRP 3199820012000now2000-nowVRP 5VRP 8VRP versions 5 and 8 are currently used in Huawei products Establishing ConnectivityPage 8ConsoleMini USBAR2200S5700Console Device Access via Console Page 9Host ARTAConsole CableConsoleCOM PortA physical connection is established between the serial (COM) port and the console interface of the router/switch. Console Access Setup ProceduresPage 10Please configure the login password (maximum length 16)Enter password:huaweiConfirm password:huaweiHuawei Router Access via Mini USB Page 11HostRouterUSB CableMini USBUSBConnection is made between the USB port of the host and the mini USB interface of the router. Mini USB