Schneider Electric施耐德Installation Instruction for 5000SDx Series C-Bus Software Dongle安装和用户指南(英语).pdf

C-Bus Software Dongle 5000SDx Series C-Bus Software Dongle The C-BUS Software Dongle is a small USB device used to enable licensed opening of C-BUS OPC Server, Schedule Plus or HomeGate software. The blue labelled dongle is available in various product specific versions, supporting either 2, 10 or unlimited C-Bus networks. Catalogue numbers are listed in Table 1. Licensed Networks Software 2 10 Unlimited C-Bus OPC Server 5000SDOPC2/1 5000SDOPC10/1 5000SDOPCU/1 Schedule Plus 5000SDSP2/4 5000SDSP10/4 5000SDSPU/4 HomeGate 5000SDHG2/4 5000SDHG10/4 Table 1 - Clipsal catalogue numbers for C-Bus Software Dongles Requirements The C-Bus Software Dongle works in the following Windows environments: Windows XP Home\Windows Vista Ultimate Windows XP Professional\Windows Vista Business Windows Server 2003\Windows Vista Enterprise. A free USB port (V1.1 or 2.0) is required. Installation 1) Install the C-Bus OPC Server, Schedule Plus or HomeGate software, available from the Downloads section of the CIS web site (/cis). 2) Insert the C-Bus Software Dongle in the PCs USB port. 3) Run the C-Bus OPC Server, Schedule Plus or HomeGate software. Clipsal, C-Bus and Schedule Plus are registered trademarks and HomeGate is a trademark of Clipsal Australia Pty Ltd ABN 27 007 873 529. Windows, Windows XP, Windows Server and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries. © Copyright Clipsal Australia Pty Ltd. All rights Reserved. Product of Clipsal Integrated Systems, a division of Clipsal Australia Pty Ltd 1032079 F2051