高速复合材料轴向被动磁轴承的参数化设计.pdfVIP

第55卷第12期 戳电机 Vol. 55. No. 12 2022年 12月 MICROMOTORS Dec. 2022 高速复合材料轴向被动磁轴承的参数化设计 梁志宏 ，黄漪帅 ，李飞 (国家能源集团宁夏电力公司 ，银川750011 ) 摘 要 ：通过研究现有的Halbach结构轴向被动磁轴承发现 ，隔磁环的强度大大限制了磁轴承的转速 。论文提出了 一种新型采用高模量复合材料M40J为隔磁环的轴向被动磁轴承 。通过有限元仿真对比分析 ，在相同结构尺寸下， 新型磁轴承能比现有轴向被动磁轴承的转速提高了一倍 。为了满足不同储能飞轮对磁轴承性能要求 ，论文对磁轴承 进行了基于APDL语言的参数化编程 ，实现了不同参数的被动磁轴承仿真分析 ，并且能对磁轴承作用范围内的承载 力与支承刚度进行快速循环求解 ，实现磁轴承的敏捷设计 ，为轴向被动轴承在储能飞轮中的普及应用奠定基础。 关键词 ：被动磁轴承 ；复合材料 ；结构强度 ；APDL；支承刚度； 中图分类号 ：TM355 文献标志码 ：A 文章编号 ：1001-6848(2022)124)039-06 Parametric Design of High Speed Composite Axial Passive Magnetic Bearing LIANG Zhihong, HUANG Yishuai, LI Fei (Ningxia Electric Power Company, National Energy Group, Ytnchuan 750011, China ) Abstract: By studying the existing Halbach structure axial passive magnetic bearings, it is found that the strength of magnetic isolation structure greatly limits the speed of magnetic bearings. This paper presented a new type of axial passive magnetic bearing with high modulus composite material M40J as magnetic isolation structure. The results of finite element simulation show that the rotating speed o£ the new magnetic bearing is twice higher than that of the existing axial passive magnetic bearing under the same structure size. In order to meet the performance requirements of magnetic bearings for different energy storage flywheels, parametric programming of magnetic bearings based on APDL language was carried out to realize the simulation analysis of passive magnetic bearings with different parameters. In addition, the bearing capacity and supporting stiffness within the range of magnetic bearings can be solved in a rapid cycle to realize the