曲轴连杆颈复合跟随车削系统的运动精度分析的开题报告.docxVIP

曲轴连杆颈复合跟随车削系统的运动精度分析的开题报告 摘要： 曲轴连杆颈复合跟随车削系统是利用机床主轴和追随轴上分别安装两个刀架实现对汽车、发动机曲轴连杆颈的一次成形加工的一种新型车削加工工艺。然而，在加工过程中需要保证曲轴连杆颈的形状和精度，因此对于该系统的运动精度分析至关重要。 本文重点分析了曲轴连杆颈复合跟随车削系统的运动精度分析方法以及运动精度分析方法的优化方案。首先，介绍了该系统的工作原理，重点介绍了系统的有关机构和运动控制系统的组成和工作原理。然后，着重分析了系统的动力学模型和误差模型，并对模型中的运动方程和误差项进行了详细介绍。最后，提出了针对该系统的运动精度分析方法的优化方案，其中包括精度检测和误差补偿两个方面，并对优化方案进行了实验验证。 通过本文的研究，可以更加深入地了解曲轴连杆颈复合跟随车削系统的运动精度分析方法和运动精度分析的优化方案，为工程实践提供支持和指导。 关键词：曲轴连杆颈复合跟随车削系统；运动精度分析；优化方案；误差补偿；精度检测；机床设计 Abstract: The crankshaft connecting rod neck composite follow-up turning system is a new type of turning processing technology that uses two tool holders installed on the main spindle and follow-up axis of the machine tool to realize one-time forming processing of automobile and engine crankshaft connecting rod necks. However, in the processing process, it is necessary to ensure the shape and accuracy of the crankshaft connecting rod neck, so the analysis of the motion accuracy of the system is crucial. This paper focuses on the analysis method of the motion accuracy of the crankshaft connecting rod neck composite follow-up turning system and the optimization scheme of the motion accuracy analysis method. First, the working principle of the system is introduced, focusing on the composition and working principle of the related mechanisms and motion control systems of the system. Then, the dynamic model and error model of the system are analyzed in detail, and the motion equations and error terms in the model are introduced in detail. Finally, an optimization scheme for the motion accuracy analysis method of the system is proposed, which includes two aspects: accuracy detection and error compensation, and the optimization scheme has been experimentally verified. Through the research in this paper, we can have a deeper understanding of the motion accuracy analysis method and optimization scheme of the crankshaft connecting rod neck composite follow-up turning system, which provides support and guidance for engineering practice. Keywor