comsol错误提示及解决方法.docxVIP

Diagnostics : Error Messages Error Messages TABLE 2-1: ERROR MESSAGE CATEGORIESNUMBERS CATEGORY TABLE 2-1: ERROR MESSAGE CATEGORIES NUMBERS CATEGORY 1000–1999 Importing Models 2000–2999 Geometry Modeling 3000–3999 CAD Import 4000–4999 Mesh Generation 5000–5999 Point, Edge, Boundary, and Subdomain Specification 6000–6999 Assembly and Extended Mesh 7000–7999 Solvers 8000–8999 Postprocessing 9000–9999 General For error messages that do not appearin the following lists, contact COMSOL’s support team for help. 2000–2999 Geometry Modeling TABLE 2-2: GEOMETRY MODELING ERROR MESSAGES ERROR NUMBER ERROR MESSAGE EXPLANATION 2118 Negative output from empty input Incorrect Geometry M-file. 2119 Non scalar output from empty input Incorrect Geometry M-file. 2120 Normal directions are inconsistent Incorrect input data from STL/VRML import. 2138 Self intersections not supported Curves resulting in self-intersections are not supported. 2140 Singular extrusions not supported Error in input parameters. 2141 Singular revolutions not supported The revolved mesh has a singularity at the z axis. If possible, create the cylinder using a 3D primitive or by revolving the geometry before meshing. 2146 Subdomain must bounded at least four boundary segments Incorrect geometry for mapped mesh. 2147 Subdomain must bound one connected edge component only Incorrect geometry for mapped mesh. 2190 Invalid radius or distance Incorrect input parameters to fillet/chamfer. 2197 Operation resulted in empty geometry object Geometry operation resulted in an empty geometry object which is not allowed. Make sure an empty geometry object is not created. 2209 Geometry to revolve may The axis of revolution and the geometry intersect. not cross axis of Check the dimension of the geometry and the revolution definition of the axis for the revolution. 4000–4999 Mesh Generation TABLE 2-3: MESH GENERATION ERROR MESSAGES ERROR NUMBER ERROR MESSAGE EXPLANATION 4002 A degenerated tetrahedron was created The mesh gener