patrannastran软件wsbolted joint研讨会8螺栓接头分析.pdfVIP

• Workshop Objectives – Compare SOL 101 and SOL 400 yses for a bolted joint. – Note that in SOL 101 bolt preload can not be applied whereas in SOL 400 bolt preload can be applied. • Software Version – MSC Nastran 2012.2 – Patran 2012.2 • Files Required – bolted_joint.db • Problem Description (SOL 101) – Open an existing model of a bolted te. Modify attributes and run a nonlinear ysis. – Create Contact conditions between the three components of the te: upper_fitting, bolt, lower_fitting.