AutoCAD英文教程专业知识讲座.pptxVIP

Lecture Two4 Creating 2D Objects 1 Modifying Objects 2 Work with Layers35 Drawing Geometric Objects Create a Drawing Template File Control Screen Display 6第1页 1.Creating 2D Objects You can create a range of 2D objects, from simple lines and circles to spline curves,and ellipses. In general, you draw objects by specifying points with the pointing device , by entering coordinate values on the command line or by Draw tool bar.第2页 1.1 Drawing Linear Objects Draw Lines In a simple line with connected segments, each segment is a separate line object. Draw Polylines A polyline is a connected sequence of line segments created as a single object. You can create straight line segments, arc segments, or a combination of the two. Draw Rectangles and Polygons You can create rectangles and regular polygons quickly. Creating polygons is a simple way to draw equilateral triangles, squares, pentagons, hexagons, and so on. Draw Multiple-Line Objects Multilines are composed of 1 to 16 parallel lines, called elements. 第3页 1.1.1 Drawing Polylines A polyline is a connected sequence of line segments created as a single object. You can create straight line segments, arc segments, or a combination of the two. Multisegmented lines provide editing capabilities unavailable for single lines. For example, you can adjust their width and curvature. After youve created a polyline, you can edit it with PEDIT or use EXPLODE to convert it to individual line and arc segments. 第4页 1.1.2 Drawing Rectangles Use RECTANG to create closed polylines in a rectangular shape. You can specify the length, width, area, and rotation parameters. You can also control the type of corners on the rectangle—fillet, chamfer, or square. Chamfer=5 x 5 Fillet=10.0000 Chamfer=0 Fillet=0 Width=5Rectangle modes: Rtation=31 Area=1000 Length=50 Dimensions: Length=100 Width=40第5页 1.1.3 Drawing Polygons Use POLYGON to