- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
农业装备工程学院毕业设计论文
9
河 南 科 技 大 学
毕 业 设 计(论 文)
题目:基于单片机的顺流式粮食干燥控制系统设计
姓名:
叶壮
学院:
农业装备工程学院
专业:
农业电气化(卓越)
指导教师:
崔宏伟
2024年 05月26日
基于单片机的顺流式粮食干燥控制系统设计
摘 要
粮食干燥是粮食收获后的一个重要环节,因为收获时为了减少田间落粒损失都注意适时收获,而适时收获的粮食其水分较大,如不及时干燥则必造成粮食霉烂变质。据统计,我国每年收获的粮食中由于干燥不及时而造成的霉烂损失达500~1000万吨,估计占全年粮食总产量的1.5%~3%;在南方梅雨季节较长的省份(江苏、浙江、安徽、湖北以及上海等),每年粮食霉烂损失高达10%左右,可见粮食干燥是一个不容忽视的问题。
本设计针对这个问题设计一个粮食干燥模拟系统。根据需求,选择合适的硬件和软件,构建软件系统平台和硬件系统平台,进行模拟实验,主要研究内容如下:
首先,进行系统总体方案的设计,明确软件系统和硬件系统的功能要求,软件系统包括基于Keil u Vision4的单片机功能设计以及基于QT的上位机控制界面设计,硬件能够满足粮食干燥的需求。
其次,进行软硬件系统的设计搭建,硬件采用STM32单片机为主体,电机,风扇,传感器来作为控制零件,实现下位机的设计。软件根据所需要实现的功能对系统进行开发,实现对各个零件的控制,比如步进电机正转反转,加速减速,以及干燥仓内温湿度的实时显示,实现上位机的设计。
最后,实现软件和硬件的结合,对自己的操作系统进行调试,进行模拟实验,多次实验后,根据实验数据判断自己设计的系统是否达到了预期效果,并进行改进。
关键词:粮食干燥,STM32单片机 ,步进电机,温湿度传感器,QT上位机
Design of downstream grain drying control system based on single chip microcomputer
ABSTRACT
China is a country with a large population, which can produce 680 million tons of grain every year. At the same time, it needs a large amount of imported grain to meet the national demand. It is true that a lot of grain is harvested, but the grain is stored only after precipitation, and hundreds of thonds of tons of grain are lost each year because it is not dried in time. This design aims at this problem to design grain dryer. Through the single-chip control, to achieve the grain drying, storage.
First of all, we need to design the grain drying system design, the need to use parts for selection, judge whether meet the requirements, can be achieved with a single-chip control of all parts, selected parts to understand.
Secondly, it is the study of the software system. In order to realize the control of the single-chip computer by the computer, we must learn the knowledge used by the upper computer, such as the understanding of serial communication, and realize the exchange of information between the single-chip computer and the computer, can carry on the programming to the Monolithic Integrated Circuit, realizes to the Monolithic Integ
文档评论(0)