纳米SiO2对泡沫混凝土强度的影响研究及机理分析.docVIP

  • 5
  • 0
  • 约7.37千字
  • 约 12页
  • 2023-09-12 发布于浙江
  • 举报

纳米SiO2对泡沫混凝土强度的影响研究及机理分析.doc

纳米SiO2对泡沫混凝土强度的影响研究及机理分析 纳米 SiO2 对泡沫混凝土强度的影响研究及 机理分析 张静1,2,刘向东1,于建民1,3 (1. 内蒙古工业大学材料科学与工程学院,呼和浩特 010050; 5 2. 内蒙古建筑职业技术学院机电与暖通工程分院,呼和浩特 010070; 3. 内蒙古建筑职业技术学院建筑工程分院,呼和浩特 010070) 2O2、Fecl3 等物质 H摘要:以快硬型硫铝硅酸盐水泥为主要原料,用粉煤灰取代部分水泥, 以 作为发泡剂,以硬质酸钙作为稳泡剂制备泡沫混凝土。探讨了纳米 SiO2 对泡沫混凝土抗压强 度的影响。初步探讨纳米 SiO2 泡沫混凝土形成过程的机理分析。研究表明,通过添加纳米 10 SiO2,7 天的抗压强度最高可提高 15%,28 天的抗压强度最高可提高 18%。纳米 SiO2 的加 入改变了泡沫表面吸附分子的分子结构与他们之间的相互作用。 关键词:建筑材料;泡沫混凝土;纳米 SiO2;粉煤灰;H2O2;Fecl3 中图分类号:TU528.042.4 15 Effect of nano SiO2 on the properties and form mechanism of foamed concrete Zhang Jing1,2, Liu Xiangdong1, Yu Jianmin1,3 (1. School of Materials Science and Engineering, Inner Mongolia University of Technology, 20 Hohhot 010051; 2. Mechanical and Electrical Department,Inner Mongolia Technical Collage of Construction, Hohhot 010070; 3. Construction Department,Inner Mongolia Technical Collage of Construction, Hohhot 010070) Abstract: In this paper,foamed concrete is prepared with sulphate aluminium cement, fly ash, 25 2O2, Fecl3,calcium stearate and nano SiO2. The impact of the content of ano SiO2 on the H properties of compressive strength of foamed concrete is investigated, as well as the additive of ano SiO2 in the formation of foamed concrete is analyzed. Results of the study show that compressive strength of 7 days can be increased 15% and compressive strength of 28 days can be increased 18% respectively through adding nano SiO2. Nano SiO2 can be used as foam stabilizer, make shorting the foaming time, improving the foaming ability. 30 Keywords: Building materials; Foamed concrete; Nano SiO2; Fly ash; H2O2; Fecl3 0 引言 泡沫混凝土是以水泥、粉煤灰、发泡剂等为主要原料,通过加入添加剂,经自然养护成型 而制得的多孔混凝土材料[1]。泡沫混凝土由于质量轻、节约材料、绿色环保、保温性能好、 35 耐火性好、与建筑主体同寿命来源广等优势,已越来越被广泛应用于建筑行业。泡沫混凝土 的主要缺点就是强度低,如何提高其强度,是一个技术难题。特别是 100,300 kg/m3 的低密 度产品,其强度最差,但需求量又最大。如果我们能解决它的强度问题,迫在眉睫。 纳米 SiO2 由于其自身的结构特点,被广泛应用于建筑行业。研究表明[2],纳米 SiO2 由 于其化学活性和结构特性,通过加入混凝土改性剂,可以提高普通混凝土 7d 和 28d 的抗压 40 强度和抗折强度。 泡沫混凝土的成型工艺主要采用化学发泡法和机械发泡法两种[3]。本试验采用化学法制 基金项目:稀土添加剂对轻型墙体节能材

文档评论(0)

1亿VIP精品文档

相关文档