基于响应面的天然气三甘醇脱水装置用能优化.docxVIP

第43卷第2期 化 学 工 程 Vol.43 No.2 2015年2月 CHEMICAL ENGINEERING(CHINA) Feb. 2015 基于响应面的天然气三甘醇脱水装置用能优化 诸 林，邓 骥，杨 洋，李林峰 (西南石油大学化学化工学院，四川成都 610500) 摘要： 运用流程模拟软件HYSYS 建立三甘醇(TEG)脱水装置的工艺模型，选择循环量qy、再生温度t, 和三甘醇富 液进塔温度t;作为主要参数，基于响应面方法(RSM) 建立脱水装置能耗的二次显式模型。对响应面模型的显著性 和三维图进行分析，结果表明：循环量、再生温度和富液进塔温度对装置能耗影响显著，影响程度为：循环量富液 进塔温度再生温度；在对能耗的共同影响中，循环量和再生温度、循环量和富液进塔温度交互作用显著而再生温 度和富液进塔温度间交互作用可以忽略。以吸收塔出口气体水露点满足GB17820—2012为约束条件，对模型进行 最优化求解得到最优操作条件为：循环量400L/h、再生温度199.8℃、富液进塔温度130℃,在此条件下理论能耗 可下降48.3%,具有显著的节能效果。 关键词：三甘醇脱水； HYSYS;RSM; 显式模型；交互作用；优化 中图分类号：TE 646 文献标识码： A 文章编号：1005-9954(2015)02-0040-04 DOI: 10.3969/j.issn.1005-9954.2015.02.009 Optimization of energy utilization for natural gas dehydration facilities based on RSM ZHU Lin, DENG Ji, YANG Yang,LI Lin-feng (College of Chemistry Chemical Engineering, Southwest Petroleum University, Chengdu 610500, Sichuan Province,China) Abstract: The model of TEG dehydration unit was established by the chemical process simulation software HYSYS. Circulation rate qv, regeneration temperature t, and feed temperature of rich solution t; were chosen as the key parameters. The explicit energy consumption model of the dehydration unit was established using RSM. Through the analysis of energy consumption model, it shows that the circulation rate, regeneration temperature and feed temperature of rich solution all make significant contribution to energy consumption and the influence degree of them is qyt;t.. In addition, the interaction between any two factors is significant while that between regeneration temperature and feed temperature of rich solution is negligible. The regression model was optimized subjecting to the criterion that the dew point of outlet natur